PermaTimber® Original Eco Cladding compliments a traditional home and is ideal for use on both residential and commercial buildings. Being far lighter than traditional external timber cladding products, our Eco Cladding is faster and simpler to install.
Once installed, the cladding boards require none of the painting, staining or sanding a traditional timber cladding board may require, making it a true set and forget solution.
PermaTimber® Original Eco Cladding has been certified by CertMark Australia.
PermaTimber® Original Eco Cladding is available in four stunning contemporary colours.
A stunning range of custom colours are available for special order on request.
Please Note: Colour swatches are a typical illustration only. Actual colours and textures are intended to vary between individual boards and batch numbers.
A variety of different trims are available for our Cladding Range:
Original Starter Trim
Int/Ext Sleek Trim
Window Trim
Aluminium Click Double Trim
Aluminium External Corner Trim (21mm)
Aluminium C Trim (21mm)
Aluminium Bottom Trim
PermaTimber® Original Eco Cladding Profile:
Board Dimensions | 150 x 21 x 5400mm |
Span | 600mm |
Weight Per Board | 10.4kg |
Weight Per LM | 1.93kg |
Weight Per SQM | 12kg |
Download the PermaTimber® Cladding Spec Sheet |
Please Note:
Provision for adequate drainage and ventilation must be made along with the installation of a waterproof membrane / system prior to the cladding being installed
PermaTimber® contains natural timber elements. As you would be aware, timber has different natural appearances and to ensure PermaTimber® does indeed look like timber, it may also experience similar variations in colour, tone and grain. As a result of this Perma Composites® may have natural variations in each cladding board and in some instances a slight difference between sample and final colour. PermaTimber® composite products are manufactured of Wood-plastic composites certified FSC 100%, FSC Mix and FSC Recycled.
The customer / installer is responsible for inspecting each cladding board for colour, finish, size and other issues prior to installation.
Should you have a large project, it is recommended that all requirements are ordered at once to avoid any chance of colour variances.